Required Tool List

Tool Storage requirements:
At least 6,000 cubic inches, with a maximum width of 45 inches
Roller Cabinet/Cart

You will also need:
Air hose fittings to go on your tire chuck and blow gun. A Milton 777 or equivalent is what fits our air hoses.

1/4" Drive

Ratchet

2" Extension

3" Extension

Universal Joint

1/4" Drive Sockets Deep		1/4" Drive Sockets Shallow
Standard	Metric	Standard	Metric
	4mm		4mm
3/16"	5mm	3/16"	5mm
7/32"	5.5mm	7/32"	5.5mm
1/4"	6mm	1/4"	6mm
9/32"	7mm	9/32"	7mm
5/16"	8mm	5/16"	8mm
11/32"	9mm	11/32"	9mm
3/8"	10mm	3/8"	10mm
7/16"	11mm	7/16"	11mm
1/2"	12mm	1/2"	12mm
9/16"	13mm	9/16"	13mm
	14mm		14mm
	15mm		15mm

3/8" Drive

Ratchet 7"

Breaker Bar 11.5"

Universal Joint

3" Extension

6" Extension

12" Extension

Spark Plug Socket 5/8"

Spark Plug Socket 13/16

3/8" Drive Sockets, Deep		3/8" Drive Sockets Shallow
Standard	Metric	Standard	Metric
1/4"	8mm	1/4"	8mm
5/16"	9mm	5/16"	9mm
3/8"	10mm	3/8"	10mm
7/16"	11mm	7/16"	11mm
1/2"	12mm	1/2"	12mm
9/16"	13mm	9/16"	13mm
5/8"	14mm	5/8"	14mm
11/16"	15mm	11/16"	15mm
3/4"	16mm	3/4"	16mm
13/16"	17mm	13/16"	17mm
7/8"	18mm	7/8"	18mm
	19mm		19mm

1/2" Drive

Ratchet

Breaker Bar 18"

5" Extension

10" Extension

Universal Joint

1/2" Drive Sockets, Shallow or Deep, Chrome or Impact
Standard or	Metric
3/8"	12mm
7/16" or	13mm
1/2" or	14mm
9/16" or	15mm
5/8" or	16mm
11/16" or	17mm
3/4" or	18mm
13/16" or	19mm
7/8" or	20mm
15/16" or	21mm
1" or	22mm
1 1/8 or	23mm
1 1/4" or	24mm

Adapters

1/4"-3/8"

3/8"-1/4"

3/8"-1/2"

1/2"-3/8"

Wrenches and Combination Wrenches
Standard	Metric
11/32"	10mm
5/16"	11mm
3/8"	12mm
7/16"	13mm
1/2"	14mm
9/16"	15mm
5/8"	16mm
11/16"	17mm
3/4"	18mm
13/16"	19mm
7/8"	21mm
1"	22mm

Flare Nut Wrenches Metric and Standard
Standard	Metric
1/4"-5/16"	8mm
3/8"-7/16"	9mm
1/2"-9/16"	10mm-12mm
5/8"-11/16"	13mm-14mm
3/4"-13/16"	15mm-17mm
	16mm-18mm
	19mm-21mm

At least a 8 Piece Screwdriver Set

Straight Blade

Phillips

Magnetic Screwdriver & Bit Set (Recommended Bits)

Slotted Bits

Phillips Bits

Torx Bits

Pozidriv Bits

Hex Bits

Brake Tools

3/8" Drive 3/8" Hex Allen Socket

3/8" Drive T50 Socket

Brake Shoe Coil Retaining Spring remover/installer

Brake Spring Tool (remover/installer)

Additional Required Tools

Fluke 87-V (can be purchased through LLC auto club)

Circuit Tester (un-powered test light)

Terminal Crimper/Wire Stripers

Hacksaw

Gasket Scraper

Tire Chuck

Flashlight

Tape Measurer

12" Adjustable Wrench

Blow Gun

Safety Glasses

Pry Bar 16" (round tapered shaft with ladies foot end)

Pry Bar 24" (Screwdriver handle type with straight or bent end)

Feeler Gauge 0015"-.035

Spark Plug Gap Gauge 0.20"-.100

Vice Grips

Diagonal Cutters (wire cutters)

Slip Joint (standard pliers)

Needle Nose Pliers

Arc Joint (Channel lock type) pliers

Pliers/Pullers Spark Plug Boot

Hammer plastic head

Hammer Ball Peen 16 oz.

Hammer Ball Peen 32 oz.