Academic Programs

Automotive Technician I (CRT.AT1)

The 24-credit hour automotive technician I certificate (CRT.AT1) prepares students with entry-level skills needed by technicians in the automotive industry in a stackable certificate. Students gain valuable hands-on skills that build confidence and knowledge needed to be successful. The curriculum is designed to build students' skills related to electrical, suspension, steering, braking, computer, and engine systems as well as aim them toward Automotive Service Excellence (ASE) certification. Instruction is provided by ASE certified instructors in a shop/lab that is equipped with modern equipment.

Request More Info

Catalog Term Year: 2025 Summer

First Year
First Semester

COREAUT-048

Credit Hours: 3.00

COREAUT-051

Credit Hours: 3.00

COREAUT-080

Credit Hours: 3.00

COREAUT-053

Credit Hours: 3.00

First Year
Second Semester

COREAUT-050

Credit Hours: 3.00

COREAUT-052

Credit Hours: 3.00

COREAUT-071

Credit Hours: 4.00

ELE--- ---

Credit Hours: 2.00

FIRST YEAR
First Semester			Hours
CORE	AUT-048	Intro to Auto Maintenance & Light Repair AUT-048 Intro to Auto Maintenance & Light Repair This course is a study of chemicals, shop safety and operations, tools and equipment, and careers in automotive technology. Techniques and task associated with electrical/electronics, heating and air conditioning, engine repair, brakes, steering and suspension, and engine performance will be discussed and performed. Course Outline	3.0
CORE	AUT-051	Electrical Systems I AUT-051 Electrical Systems I This course is a study of basic electrical systems of a vehicle. It includes basic Ohm's Law, electrical circuits, automotive meters and oscilloscopes, Automotive wiring and wiring repair, schematics, cranking circuits and charging systems. Course Outline	3.0
CORE	AUT-080	Auto Suspension & Steering AUT-080 Auto Suspension & Steering This course is a study of vehicle suspension and steering systems, including their effect on handling, efficiency and tire life. As a student, you will successfully execute the alignment process, using a computerized vehicle alignment system. Course Outline	3.0
CORE	AUT-053	Brake Systems AUT-053 Brake Systems This course is a study of the hydraulic principles of drum, disc and ABS brake systems. Basic diagnosis and repair of the hydraulic system, power assist systems, drum and disc braking systems and ABS braking systems. Course Outline	3.0
	Semester Totals		12.0
Second Semester
CORE	AUT-050	Automotive Engine Repair AUT-050 Automotive Engine Repair This course is a study of automotive engine design, diagnosis and removal/installation will be discussed, as well as cylinder head and valve train repair, short block repair, lubrication and cooling systems diagnostics. Hands-on engine disassembly, diagnostics and reassembly is included. Course Outline	3.0
CORE	AUT-052	Engine Computer Systems/Sensors AUT-052 Engine Computer Systems/Sensors This course is the study of computerized engine control system operation and diagnosis. Focusing on computer networks, sensors, and basic engine performance diagnosis. Course Outline	3.0
CORE	AUT-071	Automotive Lab I AUT-071 Automotive Lab I This course is designed to promote on-the-job training skills in automotive technology by applying skills and knowledge gained from the classes already completed for the ASE Education Foundation master task lists from AUT-048, AUT-051, AUT-050, AUT-080, AUT-053, AUT-052.(Repeatable 3 times). Course Outline	4.0
ELE	--- ---	Career Elective --- --- Career Elective	2.0
	Semester Totals		12.0

Total Program Hours

24.0

Suggested Electives
ELE	MTT-050	Intro to Machining Procedures MTT-050 Intro to Machining Procedures A study designed to highlight the theory and application of cutoff machines, drill press, engine lathe, milling machines and basic benchwork involving layout and hand tools. Course Outline	3.0
ELE	IND-044	Fluid Power IND-044 Fluid Power Provides technicians with basic concepts of pneumatics and hydraulics. This includes fluid properties and laws, safety concerns, conductor types and sizing, pump operation and horsepower requirements, directional, pressure and flow control valves and fluid symbols. Trainers provide hands-on experience for students. Course Outline	3.0
ELE	WEL-057	Welding Fundamentals WEL-057 Welding Fundamentals Course will cover basic welding processes, including: Oxy-Acetylene welding, Arc welding, Cutting and Brazing. Course Outline	2.5
ELE	AUT-045	Safe Practices AUT-045 Safe Practices Designed to educate students on general industry practices for the workplace and job site, including recognizing, avoiding, preventing and stopping potential workplace hazards. Course Outline	2.0
ELE	BUS-142	Introduction to Business BUS-142 Introduction to Business Covers the objectives, organization, and role of business in the free-enterprise system. The course is designed to provide an overview of the field of business and to provide a framework into which specialized fields may be studied. Course Outline	3.0

Call Counseling Services: 217-234-5232
Email: counsel@lakelandcollege.edu

Faculty Contact: Brian E. Madlem
Faculty Email: bmadlem@lakelandcollege.edu
Faculty Phone: 217-234-5541

* There are prerequisites, course requisites, or minimum placement test scores for this course.
** Electives must be approved by the Program Coordinator
+ Course only offered fall semester
++ Course only offered spring and summer semester
+++ Course only offered spring semester
++++ Course offered in summer term only
^ SOS 050 Human Relations and PSY 271 Introduction to Psychology cannot be used as a social science elective
^^ Consult Academic Advisor for appropriate course
^^^ Course requires a 30-hour practicum experience in addition to classroom lecture hours
^^^^ ECE 120 and ECE 125 must be taken the same semester

Suggested Electives
ELE	MTT-050	Intro to Machining Procedures MTT-050 Intro to Machining Procedures A study designed to highlight the theory and application of cutoff machines, drill press, engine lathe, milling machines and basic benchwork involving layout and hand tools. Course Outline	3.0
ELE	IND-044	Fluid Power IND-044 Fluid Power Provides technicians with basic concepts of pneumatics and hydraulics. This includes fluid properties and laws, safety concerns, conductor types and sizing, pump operation and horsepower requirements, directional, pressure and flow control valves and fluid symbols. Trainers provide hands-on experience for students. Course Outline	3.0
ELE	WEL-057	Welding Fundamentals WEL-057 Welding Fundamentals Course will cover basic welding processes, including: Oxy-Acetylene welding, Arc welding, Cutting and Brazing. Course Outline	2.5
ELE	AUT-045	Safe Practices AUT-045 Safe Practices Designed to educate students on general industry practices for the workplace and job site, including recognizing, avoiding, preventing and stopping potential workplace hazards. Course Outline	2.0
ELE	BUS-142	Introduction to Business BUS-142 Introduction to Business Covers the objectives, organization, and role of business in the free-enterprise system. The course is designed to provide an overview of the field of business and to provide a framework into which specialized fields may be studied. Course Outline	3.0

Suggested Electives
ELE	MTT-050	Intro to Machining Procedures MTT-050 Intro to Machining Procedures A study designed to highlight the theory and application of cutoff machines, drill press, engine lathe, milling machines and basic benchwork involving layout and hand tools. Course Outline	3.0
ELE	IND-044	Fluid Power IND-044 Fluid Power Provides technicians with basic concepts of pneumatics and hydraulics. This includes fluid properties and laws, safety concerns, conductor types and sizing, pump operation and horsepower requirements, directional, pressure and flow control valves and fluid symbols. Trainers provide hands-on experience for students. Course Outline	3.0
ELE	WEL-057	Welding Fundamentals WEL-057 Welding Fundamentals Course will cover basic welding processes, including: Oxy-Acetylene welding, Arc welding, Cutting and Brazing. Course Outline	2.5
ELE	AUT-045	Safe Practices AUT-045 Safe Practices Designed to educate students on general industry practices for the workplace and job site, including recognizing, avoiding, preventing and stopping potential workplace hazards. Course Outline	2.0
ELE	BUS-142	Introduction to Business BUS-142 Introduction to Business Covers the objectives, organization, and role of business in the free-enterprise system. The course is designed to provide an overview of the field of business and to provide a framework into which specialized fields may be studied. Course Outline	3.0

Automotive Technician I (CRT.AT1)

Extra Resources

Catalog Term Year: 2025 Summer

First YearFirst Semester

First YearSecond Semester

AUT-048Intro to Auto Maintenance & Light Repair

AUT-051Electrical Systems I

AUT-080Auto Suspension & Steering

AUT-053Brake Systems

Semester Totals

AUT-050Automotive Engine Repair

AUT-052Engine Computer Systems/Sensors

AUT-071Automotive Lab I

--- ---Career Elective

Semester Totals

Total Program Hours

MTT-050Intro to Machining Procedures

IND-044Fluid Power

WEL-057Welding Fundamentals

AUT-045Safe Practices

BUS-142Introduction to Business

MTT-050Intro to Machining Procedures

IND-044Fluid Power

WEL-057Welding Fundamentals

AUT-045Safe Practices

BUS-142Introduction to Business

MTT-050Intro to Machining Procedures

IND-044Fluid Power

WEL-057Welding Fundamentals

AUT-045Safe Practices

BUS-142Introduction to Business

First Year
First Semester

First Year
Second Semester

AUT-048
Intro to Auto Maintenance & Light Repair

AUT-051
Electrical Systems I

AUT-080
Auto Suspension & Steering

AUT-053
Brake Systems

AUT-050
Automotive Engine Repair

AUT-052
Engine Computer Systems/Sensors

AUT-071
Automotive Lab I

--- ---
Career Elective

MTT-050
Intro to Machining Procedures

IND-044
Fluid Power

WEL-057
Welding Fundamentals

AUT-045
Safe Practices

BUS-142
Introduction to Business

MTT-050
Intro to Machining Procedures

IND-044
Fluid Power

WEL-057
Welding Fundamentals

AUT-045
Safe Practices

BUS-142
Introduction to Business

MTT-050
Intro to Machining Procedures

IND-044
Fluid Power

WEL-057
Welding Fundamentals

AUT-045
Safe Practices

BUS-142
Introduction to Business